 |
Back |
For full Warranty details please refer to the product profile!
Engineering Materials - Controlled Volatility - Thermally Conductive Materials
Details: CV-2964 - Two-part, white, thermally conductive, low viscosity silicone elastomer
| Product Profile: | CV-2964P.pdf |
|---|---|
| MSDS PDF A: | CV2964Amsds.pdf |
| MSDS PDF B: | CV2964Bmsds.pdf |
Basic Product Overview: |
|
| Section: | Engineering Materials - Controlled Volatility |
| Description: | Thermally Conductive Materials |
| NuSil ID: | CV-2964 |
| Flow/Viscosity: | - - |
| Cure System: | Cures with heat |
| Solids Content: | - - |
| Work Time: | 5 hours |
| Cure Time/Temp: | - - |
| Post Cure Time/Temp: | - - |
| Specific Gravity: | 2.43 |
| Durometer Type A Certified: | - - |
| Durometer Type A Typical: | 55 |
| Tensile psi Certified: | - - |
| Tensile psi Typical: | 125 psi |
| Tensile MPa Certified: | - - |
| Tensile MPa Typical: | - - |
| Elongation Percent Certified: | - - |
| Elongation Percent Typical: | 50% |
| Tear PPI Certified: | - - |
| Tear PPI Typical: | - - |
| Tear kN/m Certified: | - - |
| Tear kN/m Typical: | - - |
| Lap Shear psi/Mpa: | 0.76 Mpa |
| Dielectric Strength V/mil: | - - |
| Operating Temp: | - - |
| Plasticity/Viscosity/Extrusion Typical: | - - |
| Stress Strain: | - - |
| Mix Ratio: | 1:1 |
| Colour: | White |
| Comments: | Two-part, white, thermally conductive, low viscosity silicone elastomer |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
