 |
Back |
For full Warranty details please refer to the product profile!
Engineering Materials - Controlled Volatility - Potting and Encapsulating Material
Details: CV10-2568 - Fast Cure Low Density Primed Lap Shear 140psi (1.0MPa)
| Product Profile: | CV10-2568.pdf |
|---|---|
| MSDS PDF A: | CV10-2568_EU_English.pdf |
Basic Product Overview: |
|
| Section: | Engineering Materials - Controlled Volatility |
| Description: | Potting and Encapsulating Material |
| NuSil ID: | CV10-2568 |
| Cure System: | PT Addition |
| Work Time: | 3 HR |
| Cure Time/Temp: | 30 M / 150 |
| Specific Gravity: | 0.76 |
| Durometer Type A Typical: | 40 |
| Tensile psi Typical: | 235 |
| Tensile MPa Typical: | 1.6 |
| Elongation Percent Typical: | 170 |
| Lap Shear psi/Mpa: | 175 |
| Dielectric Strength V/mil: | 860 |
| Operating Temp: | -115 to 260 |
| Mix Ratio: | 1:1 |
| Colour: | Red |
| Comments: | Fast Cure Low Density Primed Lap Shear 140psi (1.0MPa) |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
